commit - /dev/null
commit + 83886dc7c970054fba434035c12cf49ff48e53da
blob - /dev/null
blob + 2f748858bc033b0d76576f76fe20056197d84bf9 (mode 644)
--- /dev/null
+++ Makefile
+#
+# Makefile pr0n.
+#
+# by gonzalo@x61.sh
+#
+#
+
+vmm:
+ @echo ""
+ @echo "[+] Downloading files from https://github.com/gonzalo-/vmm_setup"
+ @echo ""
+ @cd /tmp
+ @ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/hostname.vether0
+ @ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/hostname.bridge0
+ @ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/dhcpd.conf
+ @ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/pf.conf
+ @ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/vm.conf
+ @ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/sysctl.conf
+ @echo ""
+ @echo "[+] Installing files..."
+ @echo ""
+ @install -m 0640 -g wheel -o root /tmp/hostname.vether0 /etc
+ @install -m 0640 -g wheel -o root /tmp/hostname.bridge0 /etc
+ @install -m 0600 -g wheel -o root /tmp/{pf,sysctl,dhcpd,vm}.conf /etc
+ @rm /tmp/hostname.* /tmp/*.conf
+ @echo ""
+ @echo "[+] Downloading OpenBSD kernels and Alpine Linux iso..."
+ @echo ""
+ @mkdir -p /VMs/openbsd/snapshots/amd64/
+ @mkdir -p /VMs/linux
+ @cd /VMs/linux && ftp -V https://nl.alpinelinux.org/alpine/v3.6/releases/x86_64/alpine-virt-3.6.0-x86_64.iso
+ @cd /VMs/openbsd/snapshots/amd64/ && ftp -V https://fastly.cdn.openbsd.org/pub/OpenBSD/snapshots/amd64/bsd{.mp,.rd}
+ @ftp -V https://fastly.cdn.openbsd.org/pub/OpenBSD/snapshots/amd64/install63.fs
+ @echo "To create the disks run something like this: "
+ @echo 'vmctl create "/VMs/OpenBSD_Ports.img" -s 25G'
+ @echo ""
+ @echo "[+] Enabling vmd & setting dhcpd..."
+ @echo ""
+ @rcctl enable vmd && rcctl enable dhcpd && rcctl set dhcpd flags vether0
+ @echo ""
+ @echo "[+] All done, you can reboot now and play with vmm(4)."
+ @echo ""
blob - /dev/null
blob + 32caee5b5c06c74c47391d521d309328f4479e2e (mode 644)
--- /dev/null
+++ README.md
+# OpenBSD vmm(4) example setup
+
+The idea of this repo is to setup an example vmm(4) environment to run VMs over OpenBSD, with OpenBSD.
+
+For debian on vmm(4) you can also see @vext01:
+
+https://github.com/vext01/recipes/blob/master/recipes/debian9_inside_vmm.md
+
+
+# WARNING: This will override your files if exists
+
+## hostname.vether0
+
+You can set your VMs network here, for now is 10.10.10.0/24 and runs the DHCP server on 10.10.10.255
+
+## hostname.bridge0
+
+This file bridges your network so the VMs can talk to vether0 to get a DHCP address and be forwarded to the internet.
+In the new syntax, ```add vether0``` has been removed and replaced with ```interface bridge0``` so now the network looks like this:
+
+``` vm ---> bridge0 ---> vether0 ---> internet```
+
+## pf.conf
+
+A typical pf.conf, $ext_if are our inet interfaces, and $int_if are our 'internal', in this case, the
+internals interfaces are the ones connected to VMs, in this case vether0 and tapX. You need to edit this
+according to your machine.
+
+## sysctl.conf
+
+Now our machine is our VMs GW, so we need to permite the ip forwarding.
+
+## dhcpd.conf
+
+A regular dhcpd setup, for our VMs, setting our network and nameservers.
+
+## vm.conf
+
+Our VMs file, has comments, this is the main file, you need to edit this to your taste.
+
+## Makefile usage
+
+Assuming you have comp6X.tgz installed.
+
+```
+# cd /tmp
+# ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/Makefile
+# make vmm
+
+[+] Downloading files from https://github.com/gonzalo-/vmm_setup
+
+hostname.vether0 100% |*********************************************************| 39 00:00
+dhcpd.conf 100% |*********************************************************| 420 00:00
+vm.conf 100% |*********************************************************| 216 00:00
+pf.conf 100% |*********************************************************| 1882 00:00
+sysctl.conf 100% |*********************************************************| 25 00:00
+
+[+] Installing files...
+
+[+] Enabling vmd & setting dhcpd...
+
+[+] All done, you can reboot now and play with vmm(4).
+
+# reboot
+```
+
+## vmm.sh usage
+
+```
+# cd /tmp
+# ftp -o - https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/vmm.sh | sh -
+Trying 151.101.24.133...
+Requesting https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/vmm.sh
+1329 bytes received in 0.00 seconds (6.12 MB/s)
+
+[+] Downloading files from https://github.com/gonzalo-/vmm_setup
+
+hostname.vether0 100% |*********************************************************| 39 00:00
+dhcpd.conf 100% |*********************************************************| 420 00:00
+vm.conf 100% |*********************************************************| 216 00:00
+pf.conf 100% |*********************************************************| 1882 00:00
+sysctl.conf 100% |*********************************************************| 25 00:00
+
+[+] Installing files...
+
+[+] Enabling vmd & setting dhcpd...
+
+[+] All done, you can reboot now and play with vmm(4).
+
+# reboot
+```
+
+# vmm(4) running
+```
+$ vmctl status
+ ID PID VCPUS MAXMEM CURMEM TTY OWNER NAME
+ 7 25839 1 512M 161M ttyp1 root OpenBSD_Test.vm
+ 6 96312 1 2.0G 733M ttyp0 root OpenBSD_Ports.vm
+ 3 30269 1 2.0G 401M ttyp6 root Alpine_Linux.vm
+```
+
+```
+$ doas vmctl console 7
+
+OpenBSD/amd64 (test.vm.incre.host) (tty00)
+
+login:
+```
+
+```
+$ doas vmctl console 3
+
+
+Welcome to Alpine Linux 3.6
+Kernel 4.9.32-0-virthardened on an x86_64 (/dev/ttyS0)
+
+sonarr login: gonzalo
+Password:
+Welcome to Alpine!
+
+The Alpine Wiki contains a large amount of how-to guides and general
+information about administrating Alpine systems.
+See <http://wiki.alpinelinux.org>.
+
+You can setup the system with the command: setup-alpine
+
+You may change this message by editing /etc/motd.
+
+alpine:~$
+```
blob - /dev/null
blob + 5f2d4af91e4e63332a3a20941c2b86da159cef39 (mode 644)
--- /dev/null
+++ dhcpd.conf
+shared-network VMs-NETWORK {
+ subnet 10.10.10.0 netmask 255.255.255.0 {
+ range 10.10.10.100 10.10.10.110;
+
+ option subnet-mask 255.255.255.0;
+ option broadcast-address 10.10.10.255;
+ option routers 10.10.10.1;
+ ## change me
+ option domain-name-servers 9.9.9.9;
+ ## change me
+ }
+}
blob - /dev/null
blob + 634b6a0b00eb328c4c76c609edcef51227d8ae7c (mode 644)
--- /dev/null
+++ hostname.bridge0
+add vether0
+up
blob - /dev/null
blob + 9d0d70e1c015425b4d2902db8de0f14254983117 (mode 644)
--- /dev/null
+++ hostname.vether0
+inet 10.10.10.1 255.255.255.0 10.10.10.255
blob - /dev/null
blob + ddbdf00a283518854479385e433fc3f5c6d0f81f (mode 644)
--- /dev/null
+++ pf.conf
+## pf.conf example for vmm(4)
+## adjust this to your own
+## interfaces
+ext_if="{ iwn0 em0 }"
+##
+int_if="{ vether0 tap0 tap1 tap2 }"
+
+set skip on lo
+set block-policy drop
+set loginterface egress
+
+match in all scrub (no-df random-id max-mss 1440)
+match out on egress inet from !(egress:network) to any nat-to (egress:0)
+
+block in
+
+pass out quick inet
+pass in on $int_if inet
+pass in on egress inet proto tcp from any os OpenBSD \
+ to (egress) port 22
+
+## access from outside over port 8989
+## we rdr-to our VM 10.10.10.100 to port 8989
+pass in on $ext_if proto tcp from any \
+ to any port 8989 rdr-to 10.10.10.100 port 8989
blob - /dev/null
blob + 34bcf4c3841e5e3215d20269634985c90abc3b48 (mode 644)
--- /dev/null
+++ sysctl.conf
+net.inet.ip.forwarding=1 # 1=Permit forwarding (routing) of IPv4 packets
blob - /dev/null
blob + b30bc80ac9464f2f7755eae415adb8db8a2daad4 (mode 644)
--- /dev/null
+++ vm.conf
+## Were our sets are
+openbsd="/VMs/openbsd/snapshots/amd64/"
+linux="/VMs/linux/"
+
+## VMs Networking
+switch "local" {
+ interface bridge0
+ # I'll leave these here for now until I work out if they are useful
+ # add tap0
+ # add tap1
+ # add tap2
+}
+
+## VMs
+# This one is ready to get installed
+vm "OpenBSD_Ports.vm" {
+ ## We want this one start at boot
+ enable
+ ## Memory
+ memory 2G
+
+ boot $openbsd "bsd.rd"
+
+ ## You can create the img disk with
+ ## vmctl create "/VMs/OpenBSD_Ports.img" -s 40G
+ disk "/VMs/OpenBSD_Ports.img"
+ disk $openbsd "install63.fs"
+
+ ## Network
+ interface { switch "local" }
+}
+
+# This one already installed
+vm "OpenBSD_Test.vm" {
+ disable
+ memory 512M
+
+ disk "/VMs/OpenBSD_Test.img"
+
+ interface { switch "local" }
+}
+
+# This is an Alpine Linux ready to be installed
+# cd /VMs/linux/
+# ftp -V https://nl.alpinelinux.org/alpine/v3.6/releases/x86_64/alpine-virt-3.6.0-x86_64.iso
+# vmctl create "/home/VMs/Alpine_Linux.img" -s 25G
+# You need to install Alpine with the command: setup-alpine (from vmctl console ID_VM)
+# For debian on vmm(4) you can follow edd@ recipe on:
+# https://github.com/vext01/recipes/blob/master/recipes/debian9_inside_vmm.md
+#
+vm "Alpine_Linux.vm" {
+ owner gonzalo
+ enable
+ memory 512M
+ ## >6.3 'cdrom' is avariable for install
+ ## <6.2 we use 'disk' for .iso and install
+ cdrom $linux "alpine-virt-3.6.0-x86_64.iso"
+ disk "/VMs/Alpine_Linux.img"
+ interface { switch "local" }
+}
blob - /dev/null
blob + 267eb3e99ccd048bdfb366e43506ad3a2c4a0178 (mode 644)
--- /dev/null
+++ vmm.sh
+#
+#
+
+## debug
+#set -x
+
+echo ""
+echo "[+] Downloading files from https://github.com/gonzalo-/vmm_setup"
+echo ""
+cd /tmp
+ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/hostname.vether0
+ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/hostname.bridge0
+ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/dhcpd.conf
+ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/pf.conf
+ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/vm.conf
+ftp -V https://raw.githubusercontent.com/gonzalo-/vmm_setup/master/sysctl.conf
+echo ""
+echo "[+] Installing files..."
+echo ""
+install -m 0640 -g wheel -o root /tmp/hostname.vether0 /etc && \
+install -m 0640 -g wheel -o root /tmp/hostname.bridge0 /etc/ && \
+install -m 0600 -g wheel -o root /tmp/{pf,sysctl,dhcpd,vm}.conf /etc && \
+rm /tmp/hostname.* /tmp/*.conf >/dev/null
+echo ""
+echo "[+] Downloading OpenBSD kernels and Alpine Linux iso..."
+echo ""
+mkdir -p /VMs/openbsd/snapshots/amd64/
+mkdir -p /VMs/linux
+cd /VMs/linux && ftp -V https://nl.alpinelinux.org/alpine/v3.6/releases/x86_64/alpine-virt-3.6.0-x86_64.iso
+cd /VMs/openbsd/snapshots/amd64/ && ftp -V https://fastly.cdn.openbsd.org/pub/OpenBSD/snapshots/amd64/bsd{.mp,.rd}
+ftp -V https://fastly.cdn.openbsd.org/pub/OpenBSD/snapshots/amd64/install63.fs
+echo "To create the disks run something like this: "
+echo 'vmctl create "/VMs/OpenBSD_Ports.img" -s 25G'
+echo ""
+echo "[+] Enabling vmd & setting dhcpd..."
+echo ""
+rcctl enable vmd && rcctl enable dhcpd && rcctl set dhcpd flags vether0
+echo ""
+echo "[+] All done, you can reboot now and play with vmm(4)."
+echo ""
